Banner
This is a pair of MAVIC Module 3 rims, a 700C clincher format built on a 622mm bead-seat diameter. Each rim carries 36 spoke holes, making the set suited to a traditional touring bicycle hub and a laced wheel build.
The Module 3 is an aluminium rim. That matters for wheel response: lower rotating mass without the demands of a tubular glue job. The clincher mounting takes a standard wired-on tyre, so tyre changes stay straightforward at the roadside.
The 36-hole drilling gives builders enough anchors for a strong three-cross pattern. If you're reviving a classic touring frame, this drilling count matches the period hubs still on the market.
These rims have already been in service, so the braking surfaces and spoke beds may show light tell-tale signs of use. The images supply the precise cosmetics of this pair. They are the reference for any marks, wear, or surface patina present on the aluminium.
If you are gathering parts for a complete touring wheel build, a matching MAVIC hub or a clean vintage saddle can be linked from the catalogue. They sit well alongside this style of rim and help keep the whole project coherent.
They use a wired-on tyre, which is the standard clincher type. The rim diameter is 622mm, also known as 700C.
Each MAVIC Module 3 rim in this set has 36 spoke holes.
The rims are made of aluminium.
No, this is a used pair. The photos are the reference for the cosmetic condition and any signs of prior use on the aluminium surfaces.
Data sheet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Brand: MAVIC
Brand: MAVIC
Brand: RECORD
Brand: MAVIC
Brand: MAVIC
Brand: RECORD
Brand: MAVIC
Brand: MAVIC
check_circle
check_circle
