Banner
, and this ITM quill stem carries the fitment dimensions that make that pairing work. It measures 105 mm in length, with a 22 mm insertion diameter and a 25.6 mm handlebar clamp. The stem was produced in Italy — a detail worth flagging for anyone assembling.
Most stems you find used are either anonymous no-name parts or pitted beyond use. This ITM unit sits comfortably between the two extremes: a named Italian manufacturer, a clearly declared geometry, and no oxidation noted. The photographs accompanying this listing form part of the description and show the stem from multiple angles.
Check two numbers before you commit. The 22 mm insertion diameter must match your frame's steerer tube, and the 25.6 mm clamp must match your handlebar's centre. If your build uses a different combination, look at the ATAX Quill Stem 22-25.4-85 mm or the 3TTT Quill Stem 22.2-26-105 mm.
For a closer look at the component family, browse our vintage chainsets or explore the spare parts section to match this stem with period-correct parts from the same era.
This ITM stem measures 105 mm in length, as declared in the technical specifications.
The stem uses a 22 mm outer diameter for the frame steerer and a 25.6 mm inner diameter for the handlebar clamp.
Yes, the country of origin is listed as Italy.
No oxidation is noted in the specifications. Minor cosmetic marks or storage-related micro-scratches may still be present on this used part, and photos form part of the description.
The manufacturer part number is listed as 0000 in the product data.
Data sheet
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Brand: Philippe
Brand: BELLERI
Brand: Philippe
Brand: BELLERI
Brand: Philippe
Brand: AVA
Brand: BELLERI
Brand: PIVO
Brand: 3TTT
Brand: BELLERI
Brand: BF
check_circle
check_circle
