- New
Weighing 2620 g on the scales, this ROUTENS frame has a seat tube measurement of 54 cm (centre bottom bracket to top of tube) and a top tube of 55.5 cm (centre to centre). The rear spacing measures 124 mm, making it suitable for 5- or 6-speed vintage freewheel hubs. The steel still carries its period lightness, with no fuss.
These dimensions, typical of French artisan production, determine the choice of chainset, headset and wheels. The 35x100 thread requires a French-thread bottom bracket, still available from a few specialists.
Surface oxidation is scattered across the frame, especially at joints and on the tube surfaces. A full restoration is necessary before reassembly. The photographs form part of the description and document each area of corrosion; no structural defects are noted in the current state. This ROUTENS provides a solid base for a touring bike or classic city bicycle. Our catalogue includes other ROUTENS frames, such as this touring bike in 53x55.5 cm (2790 g, 123 mm spacing) and this model in 57x56.5 cm (3600 g), for those seeking a similar geometry or a larger variant.
The frame alone weighs 2620 grams, weighed on scales. The fork is included in this weight.
The bottom bracket must be French-thread 35x100. BSA or Italian bottom brackets are not compatible.
Yes, the intended wheel diameter is 622 mm (700C). The 124 mm rear spacing accepts vintage 5-6 speed road hubs.
The oxidation is visible on the surface in several areas. Rust treatment and repainting are recommended; the photographs document the condition precisely.
With its classic geometry and 124 mm spacing, this frame is perfectly suited for a lightweight touring or city bike build.
Your review appreciation cannot be sent
Report comment
Report sent
Your report cannot be sent
Write your review
Review sent
Your review cannot be sent
Brand: PEUGEOT
Brand: PEUGEOT
Brand: GITANE
Brand: PEUGEOT
Brand: LE SUPER
Brand: J. DUBOSCQ
Brand: G. GINET
Brand: LIBERIA
Brand: PEUGEOT
Brand: GITANE
Brand: MERCIER
Brand: VITUS
Brand: ROOLA
check_circle
check_circle